Follow us on:       

Our Products

With the immense expertise in our domain we are able to cater a comprehensive range of Cast nylon | Cast nylon rod | Cast nylon sheet | Cast nylon tube | Metalon rod | Metalon sheet | Metalon tube | Metalon bush | NYLON ROD SHEET AND TUBE for the clients. We use the top notch of quality raw materials in the whole manufacturing process. These Cast nylon | Cast nylon rod | Cast nylon sheet | Cast nylon tube | Metalon rod | Metalon sheet | Metalon tube | Metalon bush | NYLON ROD SHEET AND TUBE are made accessible in different grades and provides flawless performance during operation. Our professional makes sure that the entire range of nylon products is in host of sizes, colors and dimensions as per the specification laid down by the clients. We cater these products to the international and domestic market. On the other hand we do have customized Nylon sheet, tube, rod size to suit the specific requirement of the clients. Our prime concern is to make accessible the entire rangeat market leading prices.

Send Enquiry


In place of oil lubrication package ,MOS2 filled is added which acts as solid lubrication. This is best suited grade where the component run at comparatively higher temperature and under severe abrasion.

Send Enquiry

HS Blue is a Heat Stabilised Cast Nylon 6 . Its mechanical properties are maintained when operating at higher temperatures. This helps to reduce the stress distortion that can be caused by machining..

Send Enquiry

Oilon was first introduced into the market back in 1974. It was the very first authentic lubricated nylon having a blended liquid lubricant system built in during the process stages. This resulted in a substantial increase in bearing life more than 5 times that of natural cast cast nylon and more than 25 times that of phosphor bronze.

Send Enquiry

NYLATRON BUSHES | NYLATRON WEAR PAD is an unreinforced, self lubricating, semi-crystalline thermoplastic polyester, demonstrating dimensional stability similar to Acetal, combined with the comparable wear resistance of nylon.
Heavily loaded mechanical precision components subjected to sustained abrasive environments are particularly suited to this material.

Send Enquiry

WE ARE MANUFACTURING WIDE RANGE NYLON BEARING PAD, NYLON BUSHES, NYLON PULLEY, NYLON TROLLEY WHEEL AND NYLON DIE FOR ALUMINIUM BARTAN . These products are manufactured by the industry experts who have gained plenty of experience in this field using finest raw material

Send Enquiry

We are a renowned name in the field of manufacturing cast METALON GEAR | NYLON GEAR | GEAR PINION AND SPROCKET | TEXTILE INDUSTRIES NYLON SPUR GEAR as per their preferences and choices. These nylon gears are manufactured with the finest grade of raw material which enhances the life span of these world-class products. Our cast nylon gear is the unique blend of sturdy construction, dimensional accuracy, superior performance and long functional life which makes us a preferred choice among our esteemed clients.
We do appreciate your feedback and on the basis of your feedback we update our products and make them available in customizes forms. Our METALON GEAR | NYLON GEAR | GEAR PINION AND SPROCKET | TEXTILE INDUSTRIES NYLON SPUR GEAR< products are accessible in varied shapes and its dimensions can be threaded, bored, tapered, spindled or eccentric. The vision behind offering this customized cast Nylon Gears is to extend our hands in enhancing their business. Our company has become the biggest supplier in paper mills.

Send Enquiry

Driven by the excellence and wisdom of our team of resources, we manufacture and supply high quality NYLON PAD. | NYLON COUPLER PAD | SLIPPER PAD FOR TMT STEEL ROLLING MILL | COUPLER PAD | TMT MILL PAD. that is widely known for high tensile strength, modulus of elasticity and high wear resistance. We are capable of undertaking bulk orders of nylon products and deliver them within stipulated time frame to meet the growing demand of the market.
NYLON PAD. | NYLON COUPLER PAD | SLIPPER PAD FOR TMT STEEL ROLLING MILL | COUPLER PAD | TMT MILL PAD. are used in couplings, easily machinable, high mechanical strength, light weight, minimum maintenance and high load bearing capacity. Moreover, our quality analyst makes sure that the entire range of Casting Nylon pad has to go through the strict quality test before delivering it to our clients. Our cast nylon slipper pads are availed for our esteemed customers at highly competitive prices. By offering durable cast nylon slipper pads, we have become one of the biggest suppliers of TMT rolling industries

Send Enquiry

We manufacturer an extensive range of ?Moulded Rubber Components widely used in numerous industries like chemicals, automobiles, sugars, cements and pharmaceuticals. We fabricate these rubber components using high grade of raw material based on latest technology and advanced mechanisms which meets the quality standards. These specialized rubber molded products available in precise shapes and sizes and customized as per the specification of our clients. Clients can avail from us these products at reasonable price

Send Enquiry

SHREE MEENAKSHI POLYMERS offer a wide range of injection moulded products like industrial moulding. Our injected moulded products are made of high quality plastic materials such as pp, pvc, ldpe, hdpe, lldpe, pu, nylon, abs and many more. . Our plastic moulding is available in different sizes and shapes so as to cater the broad demands of the customers. Salient features:light weight superior tensile strength moist proof smooth surface finish

Send Enquiry

We are offer premium quality range of HYLAM sheets / rods/ tubes that are manufactured in accordance to defined quality standards. In order to suit the requirements of various industry segments.

Send Enquiry

We are offering Phenolic SHEETS / RODS/ TUBES to our clients.

Send Enquiry

WE ARE manufactured PVDF Sheets PIPES & Rods. These are Heat Resistant and Corrosion-Resistant products. Extruded PVDF Sheets have better thickness tolerance than compression-molded sheets.

Send Enquiry

WE ARE MANUFACTURED POLYAMIDE SHEETS, PIPES AND RODS . THESE ARE HIGH WEAR RESISTANCE, HIGH THERMAL STABILITY , VERY GOOD STRENGTH AND HARDNESS, HIGH MECHANICAL DAMPING CHARACTERISTICS, GOOD SLIDING PROPERTIES AND GOOD CHEMICAL RESISTANCE .

Send Enquiry

WE ARE MANUFACTURED POLYPROPLENE RODS, SHEETS.TUBES AND ITS COMPONENTS. Polypropylene is an economical material that offers a combination of outstanding physical, mechanical, thermal, and electrical properties not found in any other thermoplastic. Compared to low or high density polyethylene, it has a lower impact strength, but superior working temperature and tensile strength. Noted for its excellent chemical resistance in corrosive environments, polypropylene provides excellent resistance to organic solvents, degreasing agents and electrolytic attack. It is light in weight, resistant to staining, and has a low moisture absorption rate.

Send Enquiry

WE ARE MANUFACTURED POLYPROPLENE HOMOPOLYMERS ROD, SHEETS.TUBES AND ITS COMPONENTS Polypropylene Homopolymer (PPH) is the most widely utilized. PPH offers a high strength to weight ratio and is stiffer and stronger than copolymer, this combined with good chemical resistance and weld ability allows this material to be used in many corrosion resistant structures.

Send Enquiry

WE ARE MANUFACTURED POLYPROPLENE COPOLYMERS ROD, SHEETS.TUBES AND ITS COMPONENTS Polypropylene copolymer (PPC) is a bit softer but has better impact strength, is tougher and more durable than PPH. Copolymer polypropylene tends to have better stress crack resistance and low temperature toughness than homopolymer at the expense of quite small reductions in other properties.

Send Enquiry

High Density Polyethylene Pipes are an effective and proven method of transferring liquids, gases and other material from one location to another. High Density Polyethylene Pipes have a vast application in metropolitan, mechanical, chemical, mining and agricultural industries. They can be easily installed on ground, above surface or float under water

Send Enquiry

Our Delrin Rod is highly acknowledged by the clients for holding good wear and abrasion resistance. In the engineering industry, this rod is known for its extensive use in making gears, rollers, bushing, fittings and electronic insulator parts, pump & valve components

Send Enquiry

WE ARE MANUFACTURING OF best quality Polytetrafluoroethylene (PTFE) RODS , SHEETS AND PLATES.

Send Enquiry

We are one of the BEST manufacturers of a wide range of UHMWPE Wear Strips & Corner Trackes that is widely appreciated for high wear resistance and excellent sliding properties. These UHMWPE wear strips, profiles, railing guides, curve tracks, belt guides, magnetic corner tracks, chain guide profiles.

Send Enquiry

PVC edge protector is developed by using top grade material and advanced techniques in compliance with international quality standards. Our provided edge protector is acclaimed for its durability and excellent finish.

Send Enquiry

WE are manufacturing of high quality of cutting boards for various application.

Send Enquiry

WE ARE MANUFACTURED DIFFERENT TYPES OF CAST NYLON PRODUCT LIKES TROLLEY WHEELS,WORM FOR BOTTLING PLANTS, JCB PADS AND BUSHES, WIPER, PACKAGING MACHINES PARTS, MATERIALS HANDLING EQUIPMENTS PLASTICS PARTS, BOTTLING PACKAGING PARTS, SWEEPING MACHINE COMPONENTS, AND CONVEYOR PULLEY, GEAR STRIPS AND CHAIN LINKS.

Send Enquiry

WE ARE MANUFACTURING DIFFRIENT TYPES OF NYLON PULLEY | CRANE NYLON PULLEY | PULLEY IN ENGG PLASTICS | ROPE WAY PULLEY | WIRE INDUSTRIES PULLEY | MANES CHAIR CAR PULLEY FOR VARIOUS INDUSTRIES.

Send Enquiry

SHREE MEENAKSHI POLYMERS IS APPROVED BY RDSO – LUCKNOW AND SUPPLIED TO DLW , DMW AND AND INDIAN RAILWAY

Send Enquiry

Mfrs of tailor made Gear Box parts and Industrial Parts on CNC and VMC Machines.

Send Enquiry

Mfrs of Tailor made Aluminum parts for Packaging Machines , Automobile parts etc on CNC and VMC machines.

Send Enquiry

Mfrs of Industrial metallic parts in M.S, SS, CS AND PB etc.

Send Enquiry

MMfrs of Metal or Polymer Conveyor Roller with shaft and bearing for Industrial Conveyor System .

Send Enquiry

Mfrs. of Engg. Plastics Table Top , parts for bottle fillers machines and bottler washer machines for bottling plant / machines .

Send Enquiry

Mfrs of Stainless steel parts as per drg of customers for Automobile , Packaging machines and Material handling Equipments .

Send Enquiry

Castlon GSM / NSM Tube for oil well boring equipments , it is replacement of metallic tube.

Send Enquiry

CMfrs of Cast Nylon (Castlon) Coal Tub Pedestal and sprocket for conveyor in Mines like Coal mines , Iron Ore Mines etc.

Send Enquiry

At CASTLON we aim go a step further to meet our customer requirements. Over the years we have developed special grades of material for our customers. These include:

CASTLON Nylube Glass Filled:

For applications requiring higher compressive strength, the Nylube GF master batch incorporates hollow glass ovules, designed to float and evenly distribute through the polymerising polymer. The glass additive allows the material to operate at higher maximum service temperatures whilst the wax counteracts the deteriorating surface slip characteristics. This results in an outstanding abrasion and temperature resistant material at high loads.

CASTLON Nylube Food Grade:

Nylube FG is physiologically inert and holds full FDA accreditation for use in food and pharmaceutical applications, whilst retaining all the material characteristics of the standard Nylube product.

CASTLON Nylube MO:

The combined Nylube lubrication system incorporating fine particles of molybdenum disulphide provides enhanced load bearing capabilities whilst retaining Nylube’s excellent frictional characteristics.

CASTLON NYLASTAT ® (ATEX approved):

A conductive CASTLON special grade material, suitable for use in certified ATEX zones and more general anti-static applications.

Custom Formulated Materials:

Combining the talents of in-house engineers and chemists, CASTLON are also able to custom formulate material grades for more demanding project and application requirements.

Send Enquiry